P a g e | 7
SETTING YOUR PRESENCE STATUS
Setting Presence Status via Admin Web Interface
The SIP Presence feature on UCM6xxx includes six available statuses, users can access to the UCM Web
GUIExtension/TrunkExtensionsFeatures and list the different statuses:
Figure 2 : Presence Status
The above screenshot shows the available statuses, user can select a status depending on their availability
and preferences. Once done, a NOTIFY message will be sent to the subscribers announcing the new
defined status.
The above available statuses are explained in the following table:
Table 1: SIP Presence Status
The contact is online and can participate in conversations/phone calls.
The contact is currently away (ex: for lunch break).
The contact has limited conversation flexibility and can only be reached
via chat.
The Contact is on DND (Do Not Disturb) mode.
Please enter the presence status for this mode on the web GUI.
The contact is unreachable for the moment, please try to contact later.
To Next Page
Loading...
Need help?
General
