Grandstream Networks UCM6100 Series Configuration

Firmware Version 1.0.1.25 Configuring UCM6100 Series with HT503 Page 2 of 18
Figure 11: Method 2 - Create IVR 7000 on the UCM6100 .......................................................................... 12
Figure 12: Method 2 - Create Peer SIP Trunk on the UCM6100 ................................................................ 13
Figure 13: Method 2 - Configure Outbound Rule on the UCM6100 ........................................................... 13
Figure 14: Method 2 - Configure Inbound Rule on the UCM6100 .............................................................. 14
Figure 15: Method 2 - Configure FXO Port on the HT503: Registration ..................................................... 15
Figure 16: Method 2 - Configure FXO Port on the HT503: DTMF Settings ................................................ 15
Figure 17: Method 2 - Configure FXO Port on the HT503: FXO Termination ............................................. 16
Figure 18: Method 2 - Configure FXO Port on the HT503: Channel Dialing .............................................. 17
Figure 19: Method 2 - HT503 Basic Settings .............................................................................................. 17
This document is subject to change without notice. The latest electronic version of this document is
available for download here:
http://www.grandstream.com/support
Reproduction or transmittal of the entire or any part, in any form or by any means, electronic or print, for
any purpose without the express written permission of Grandstream Networks, Inc. is not permitted.

Grandstream Networks UCM6100 Series Specifications

General

Brand	Grandstream Networks
Model	UCM6100 Series
Category	PBX
Language	English