Grant Primo - Setting the temperature; Set Temperature Scale; Set Cooking Temperature

To Next Page

To Previous Page

Setting the temperature

Set Temperature Scale

• The temperature scale can be selected to display the temperature in Celsius or Fahrenheit.

• When the display is ﬂashing 4 dashes, hold down the Temperature Mode/Set button for 3

seconds. The display will show the current temperature scale (°C or °F).

• Use the adjustment wheel to change to °C or °F as required.

• Press Temperature Mode/Set button again to accept your chosen temperature scale.

Set Cooking Temperature

• Press the Temperature Mode/Set button.

• The display will show the last saved temperature.

• Use the adjustment wheel to set the desired temperature and press the Temperature Mode/Set

button again to save the temperature.

• The display will show the actual water temperature value, the orange heater symbol will illuminate

and the water in the tank will start to heat.

• To view the set temperature at any time, press the Temperature Mode/Set button.