Page 54 Section 16: End of Life Information
GENERAL
Grant oil boilers incorporate components manufactured from a variety of dierent materials. The majority of these materials can be
recycled whilst the smaller remainder cannot.
Materials that cannot be recycled must be disposed of according to local regulations using appropriate waste collection and/or disposal
services.
DISASSEMBLY
There is little risk to those involved in the disassembly of this product. Please refer to and follow the
Health and Safety Information given in the Installation & Servicing Instructions provided with the boiler.
For guidance on the disassembly of the boiler refer to the information given in the Servicing section of the Installation & Servicing
Instructions provided with the boiler.
RECYCLING
Many of the materials used in Grant oil boilers can be recycled, these are listed in the table below:
COMPONENT MATERIAL
Outer casing panels Mild steel (polyester powder coated)
Primary heat exchanger and baes Mild steel
Secondary heat exchanger Stainless steel
Secondary heat exchanger spirals Aluminium alloy
Pipework Copper
Burner body/ange Aluminium alloy
Burner oil pump Aluminium alloy/steel
Riello oil burner cover Plastic
Electrical wiring Copper/plastic
Thermostats Copper/plastic
Printed Circuit boards Copper/plastic
DISPOSAL
All materials other than those listed above must be disposed of responsibly as general waste.
Neil Sawers
Technical Manager
16 END OF LIFE INFORMATION
To Next Page
Loading...
Need help?
General