GRANULDISK Granule Combi - Page 11

104 All Overheating protector
for rinse tank tripped
The rinse tank heater
element has overheated.
Check the function of the level sensors,
and check that the machine is filling
with water. Reset the overheating
protector located to the right of the
electrical cabinet.
105 All Overheating protector
for wash tank tripped
out.
The wash tank heater
element has overheated.
Check the function of the level sensors,
and check that the machine is filling
with water. Reset the overheating
protector located to the right of the
electrical cabinet.
106 All Overheating protector
for one of the heater
elements tripped out.
One of the heater
elements has
overheated.
Check the function of the level sensors,
and check that the machine is filling
with water. Reset the overheating
protector located to the right of the
electrical cabinet.
107 All Temperature not reached
in wash tank
The wash water in the
wash tank does not
reach its preset
temperature during the
wash process.
Check the heating element circuit
breaker and the contactor in the
electrical cabinet.
Can also be caused by low temperature
of incoming water.
108 All Temperature not reached
in rinse tank
The rinse water in the
rinse tank does not reach
its preset temperature
during the wash process.
Check the heating element circuit
breaker and the contactor in the
electrical cabinet.
Can also be caused by low temperature
of incoming water.
109 Flexi
Maxi
Door switch Someone has attempted
to open the doors during
operation.
Close the door.
110 All Temperature sensor in
wash tank or rinse tank
non operational. Most
probably in wash tank.
The temperature sensor
in the wash tank or rinse
tank is broken. Most
probably in wash tank.
Replace the temperature sensor in the
wash tank or rinse tank.
111 All Temperature sensor in
wash tank or rinse tank
non operational. Most
probably in rinse tank.
The temperature sensor
in the wash tank or rinse
tank is broken. Most
probably in rinse tank.
Replace the temperature sensor in the
wash tank or rinse tank.
112 All Water level too low in
rinse tank
The level in the rinse
tank has fallen
erroneously.
Check the water connections to the rinse
tank. Check the condition (sensitivity
value) of the upper level sensor in the
rinse tank
113 All Water level too low in
wash tank
The level in the wash
tank has fallen
erroneously.
Check the water connections to the
wash tank, as well as the drainage pipe
and the drain valve