CONTENTS
1. INTRODUCTION
1.1 Model Names and Basic Specifications 1-1
1.2 Accessories 1-2
1.3 Features 1-3
1.4 Usage Precautions 1-5
1.5 Daily Maintenance and Storage 1-7
1.6
Main Specifications 1-8
1.7 External Dimensions 1-9
2. DESCRIPTION OF PARTS AND FUNCTIONS
2.1 Plotter Nomenclature 2-1
2.2 Control Panel 2-2
2.3 Mounting the Cutter Pen 2-4
2.4 Adjusting the Pen Carriage Height 2-5
2.5 Tilting the Writing Panel 2-6
2.6 Loading the Medium 2-7
2.7 Turning On the Plotter and Initialization 2-8
3. BASIC OPERATION
3.1 Menu Operations 3-1
3.2 Using the Special Functions 3-3
3.3 The Plotter is Turned On But Doesn’t Operate 3-5
3.4 Error Messages and Their Causes 3-7
3.4.1 Error messages in GP-GL command mode 3-7
3.4.2 Error messages in HP-GL emulation mode 3-8
3.5 The Cutting Results are Unsatisfactory 3-10
4. INTERFACE FUNCTIONS
4.1 RS232C Serial Interface 4-1
4.2 Centronics-Compatible Parallel Interface (8-Bit Parallel) 4-3
FC2230-UM251-01-1600 VI
To Next Page
Loading...
