GRAPHTEC FCX2000 SERIES - C. Set Up Cutting Master 4; Installing Cutting Master 4

13
C. Set Up Cutting Master 4
Cutting Master 4 is a plug-in driver that can output directly to
the cutting plotter from Adobe Illustrator / CorelDRAW.
Installing "Cutting Master 4"
* The computer to be installed must be connected to the
Internet.
* Email address for the account registration is required.
1
Click on the [Cutting Master 4].
Install it according to wizard.
2
Click on the [Browse] when you want to change the
destination folder.
Click on the [Next].
3
Leave the initial values for the check boxes.
Click on the [Next].
4
Click on the [Install].
5
Click on the [Yes].
6
Click on the [Finish].
7
Restart the computer.
8
Click on the “SAi Cloud Connect” icon from the “Task
Manager”.
9
"SAi Cloud Connect" screen will be displayed
Click on the [Need an account? Sign Up] item.
* When you have already acquired the SAi account,
enter the “Email” and “Password” and then click on
the [Sign In]. Go to Step 17.
10
Enter the Email address for the product registration.
Click on the [Sign up] after entering it.