4-12
Software
Menu Name Selections
(5) Settings Span Select CH: From 1-10 to 91-100
CH Span Settings: Upper, Lower
Scaling Select CH: From 1-10 to 91-100
• Meas. Output: Func, Upper, Lower
• Scaling Output: Upper, Lower, Unit
Pulse Settings Device Number.: 1 to 10
• Meas. Output: Func, Upper, Value
• Scaling Output: Upper, Lower, Unit
Data Device Settings: Sampling Interval, Data Capture Setting
PC Card Settings: File Name, Format, File Path
PC Settings: Capture File Setting, Auto File Name, Format, File Path
Auto Backup Settings: Backup Interval
Alarm Select CH :From 1-10 to 91-100
Alarm Settings: Function, Upper, Lower, Alarm Output, Combination
Alarm: Logic, Pulse Settings, Device Number: 1-10
Logic: Function, Alarm Output
Pulse: Function, Upper, Lower, Alarm Output
Trigger Trigger Settings
• Start: Function, Alarm Output
• Stop: Function, Alarm Output, Time
Level Trigger Settings
• Start: CH, Function, Upper, Lower
• Stop: CH, Function, Upper, Lower
File PC Card Operation
Data Transfer, Copy File, Delete File, Delete Folder
Device Number: 1 to 10
Card Initialize, Path, File
Report Daily Capture: Capture Interval, Destination Folder
Monthly Capture: Capture Interval, Destination Folder
Other Device Number: 1-10
Synchronize PC and device clocks, Room Temp. Compensation,
External Filter, Burn out, Power On Start, Factory Default
Send E-Mail
Send E-mail when alarm is generated, Mail Address, Comments,
SMTP Server, Sender Mail Address
Information OPS022 Version, Device Information
(6) Start
(7) Stop
(8) EXIT
(9) Review Device Open File Device, Path, Create Folder, Delete, Open Memory Data File, Filter
Convert then Save File Path: Format, Path
Data: All, Cursor
Spot Samples: Off, Select from 2 to 1000 points
Open in EXCEL Data: All, Cursor
Spot Samples: Off, Select from 2 to 1000 points
(
10
)
Waveform View
Single View, Dual View (during data capture only)
(
11
) Digital View 1-20 to 81-100, 1-50, 51-100
(
12
) Meter View 1-20 to 81-100
(
13
) Report View View in EXCEL
(
14
) Y-T Single View Display, Dual View Display, Y Axis Range 1, Y Axis Range 2,
X-axis Display Width
(
15
) X-Y
(
16
) Logic
(
17
) Alarm
(
18
)
X-axis Display Width
To Next Page
Loading...