3-28
Settings and Measurement
OTHR settings
Other miscellaneous settings are made here.
LCD brightness ................... Sets the brightness of the LCD backlight.
Available selections are Light, Medium, and Dark.
Selecting Dark allows longer operational time with batteries.
Screen Saver ...................... Automatically turns off the display if the GL800 is not operated within a
specified interval.
Available selections are Off, 10, 30s, 1, 2, 5, 10, 30, 60 min.
Turning off the display frequently using the Screen Saver function
allows longer operational time with batteries and longer lifetime of the
LCD screen.
Power On Start ................... Sets the feature which initiates measurement as soon as the GL800 is
turned on.
• Disable: Disables the Power On Start function.
• Enable: Enables the Power On Start function.
Room Temp. Compensation This parameter enables room temperature compensation settings
when thermocouples are used. You can select either internal or
external room temperature compensation.
• Internal: The GL800’s room temperature compensation settings are
used (usually, you use this parameter).
• External: This parameter is set to enable room temperature
compensation settings in external devices.
Temp. Unit........................... Toggles the temperature unit between °C and °F.
• °C: Celsius
• °F: Fahrenheit (the scaling function is compulsorily enabled)
Setting Selections available
LCD brightness Light, Medium, Dark
Screen Saver Off, 10, 30 (sec.), 1, 2, 5, 10, 30, 60 (min.)
Power On Start Disable, Enable
Room Temp. Internal, External
Temp. Unit °C, °F
Burn Out Off, On
AC Line Frequency
50/60Hz (Off, On)
Date/Time Date, time settings
Language Japanese, English (US), English (UK), French, German
Return to default settings
Information Firmware version
System Control
MAC Address
Demo Waveform Mode Off, On
Game Memory test game
Number order game
To Next Page
Loading...
