22 Creative Grading Camera Control System User’s Guide (v1.4)
Chapter 4 - CGA Operation
About and CGA/server status
Tap the server icon to open the about and status window. It shows the server’s IP address,
connection status and software version.
Safe removal of USB Flash Drive
To avoid losing data, it is important to remove USB Flash Drives safely. Tap Safe remove USB
drives to select the USB drive from the list and tap Eject (or Cancel). You can now remove the
USB drive from its port on the CCS-ONE.
Snapshot button
Tap this button to take a snapshot of the current settings of all cameras in ‘MyCameras’
selection. Snapshots are stored in the “Snapshots" section of the File Management menu.
4.2 Single camera view
The CGA has two camera view modes: Single view and Multi view. Selecting video functions
from the navigation menu works similarly in both view modes. Single view is used to operate
one camera. To switch to Single View tap Single view in the bottom-left corner of the screen:
The functions area is shown for the selected camera and the selected (group of) functions.
4.2.1 Selecting a camera
To operate a camera, tap its tile on the camera selection bar at the bottom of the screen:
To Next Page
Loading...