Creative Grading Camera Control System User’s Guide (v1.4) 57
Chapter 7 - Specifications
7.2 CGP 500 Creative Grading Panel
7.2.1 Specifications
7.2.2 Mounting
The CGP 500 is designed to be mounted into a desk surface. Make sure that the unit is
mounted according to your local safety and building regulations and that it is sufficiently
ventilated. Leave enough room below the unit to allow cables to run freely.
Be aware that the CGP 500 is slightly wider (84 mm compared to 82.5 mm) than its
predecessor (OCP 400) so this may affect your desk mounting considerations.
Item Value
Dimensions (Height x Width x Depth) 354 x 84 x 105.8 mm (13.9 x 3.3 x 4.2 in) without stick
Weight (approx.) 1.5 kg (3.3 lbs)
Operating temperatures 0 to 45° C (32 to 113° F)
Storage temperatures -25 to +70° C (-13 to 158° F)
Power requirements +10.5 to +17 VDC via DC power adapter (not supplied)
Power consumption (typ.) 4 W
Ethernet connection RJ-45 connector; 10 Mb/sec (10Base-T); 100 Mb/sec (100Base-TX),
Power over Ethernet (PoE) compatible acc. to IEEE 802.3af (802.3at
Type 1)
Serial connection Serial (RS-232 or RS-422 protocol) over Aux connector
Studio signalling Preview signal, tally red/yellow/green GPIO over preview connector.
To Next Page
Loading...