40 Creative Grading Camera Control System User’s Guide (v1.4)
Chapter 5 - CGP Operation
When the CGP is operational, its buttons and controls are illuminated. The normal color of an
available button is dim blue. The light shines brighter blue when a button is selected and/or
active. The buttons is off when its function is not available.
5.1.1 CGP local display
Shows important operational and status information such as camera number, iris value and
assignments of panel buttons. Refer to “CGP local display” on page 46 for more detailed
information about the CGP display.
5.1.2 Right function buttons
Panel Lock button
Push the Panel Lock button to lock the operation panel of the CGP. This button lights when the
panel is locked (On). When off, all functions of the CGP can be used.
Call button
Push the Call button to send a signal to the connected camera calling for attention.
• The Call button lights when it is activated OR when a call is received from another system
part.
• If active, push again to switch off.
• A buzzer signal can be associated with the call signal.
5.1.3 CGA navigation controls
This area contains a large rotary control with push button and two cursor buttons below it to
navigate through selected functions on the CGA.
Large rotary with push button
Changes a value (analog or list)
Forward button
Moves forward one function in the function area.
Back button
Moves back one function in the function area.
To Next Page
Loading...