GRASS VALLEY Creative Grading - Diagnostics; Panel

50 Creative Grading Camera Control System User’s Guide (v1.4)
Chapter 5 - CGP Operation
5.3.4 Diagnostics
Read-out information about hardware and software versions:
5.3.5 Panel
Set the panel user preferences in this section: lower rotaries function and LCD backlight level.
The camera number is also selected here.
Section Setting Values Function
MAC Address MM:MM:MM:SS
:SS:SS
Shows CGP hardware MAC address
Link Type 10 Mbit, 100 Mbit
Full/Half Duplex
Shows Ethernnet link speed (type).
(page 1) Link State Connected, Not
Connected
Shows Ethernet connection status.
Section Setting Values Function
Type CGP 500 Shows CGP device type
PID 0X999X Shows CGP PID (Product Identification)
(page 2) Type NC 1-5000100-xxxx Shows CGP model type number
Package Info nn-nnnnn-nnn
vnn.nn
Shows CGP Package code and version
Appl SW vnn.nn Shows CGP Application software version
BootSW vnn.nn Shows CGP Boot software version
Diagnostics
Diagnostics
Section Setting Values Function
BlackPot Black, Flare Assigns either Black level or Flare level adjustment to
the lower rotary RGB controls (‘BlackPots’).
LCD Backl 0..99 (50) Sets the backlight level of the LCD display.
Camera Sel 1..99 Selects the camera number (when the CGP is used
stand-alone) to directly connect to a camera system.
Panel