GRASS VALLEY Creative Grading - Assignable Controls

44 Creative Grading Camera Control System User’s Guide (v1.4)
Chapter 5 - CGP Operation
Recall Standard button
Push the Recall Standard button to recall camera settings. The Recall Standard file popup
window appears as an overlay on the CGP display:
Use the right button below the display to select either Factory or Customer file to recall. Push
the left button below the display to actually execute a Recall. Push the Recall Standard button
again to cancel and close the popup window.
5.1.13 Assignable controls
These 4 push buttons and 2 (stacked) rotary controls with push buttons on top can be assigned
to any operational camera function. The assignments are done in the CGA using the CGP
config menu. Refer to “CGP configuration menu” on page 36 for more information.
Selection buttons
These two push buttons operate the associated function in the display above the button.
Assignable rotary controls
The two rotary controls have of a lower and upper ring and a push button on top. Their
assigned functions are shown in the display above the rotary.
1
2
2b
1
2a
3