24 Creative Grading Camera Control System User’s Guide (v1.4)
Chapter 4 - CGA Operation
When a function is greyed out, it means that it is unavailable (or blocked).
When a function on the CGA is selected, the central CGA rotary on the CGP becomes active
and the LED ring around the rotary lights blue. Turn the rotary to change a range value or to
loop through a list of values. Depending on the function, values take effect immediately or after
push the rotary to confirm.
• In multi camera mode the CGP rotaries of all cameras become active (the rings light blue)
while each rotary controls its individual camera.
• In multi camera modem when cameras are grouped, the CGP rotaries the grouped
camera become active (the rings light green) while each rotary controls the function of all
grouped cameras simultaneously.
Slider for value range
functions: use the
slider to raise or lower
the value or tap the +
or - buttons.
Numeric input pad for
value range functions:
enter a number and
tap Apply.
Drop down input for
value list functions: tap
the value from the list
and the value is
immediately set.
Direct control Grouped control
To Next Page
Loading...