GRASS VALLEY Creative Grading - Page 30

30 Creative Grading Camera Control System User’s Guide (v1.4)
Chapter 4 - CGA Operation
Accessing the camera menu (‘VF Menu’)
The CGA can be used to remotely access the camera menu. In the Setup menu, scroll down to
navigate to the Camera submenu and tap the VF Menu Control item. A navigation window is
shown at the left side of the screen:
Tap On to switch on the camera menu. The contents of the menu are shown in a small tile in
the function area as well as on the monitoring output and/or in the viewfinder.
Additionally, you can use the CGA navigation rotary on the CGP to navigate the camera menu
(turn to scroll and push to select).
Accessing the XCU/base station menu
The CGA can be used to remotely access the XCU/base station menu. In the Setup menu,
scroll down to navigate to the BaseStation submenu and tap the BS Menu Control item.
Tap to switch the
camera menu on
or off
Tap to up, down and
select to navigate
the camera menu
The camera menu is shown in
this small window