Creative Grading Camera Control System User’s Guide (v1.4) 33
Chapter 4 - CGA Operation
Store — copies the camera’s Active settings to the selected file. It is not possible to store a file
when it is locked.
Rename — changes the name of the file. It is not possible to rename a file when it is locked.
Lock/Unlock— to prevent a file from being overwritten it can be locked. When a file is locked, a
small lock symbol is shown behind the filename. Tap Unlock to unlock the file.
Load — copies a file from the USB Flash Drive.
Save — copies the selected file to the USB Flash Drive.
Storing to USB Flash Drive
The Load and Save actions open the file browser dialog. Tap the storage drop down box at the
top left, select the USB Flash Drive and tap Select storage. Make sure a USB Flash Drive is
inserted into a USB port on the CCS-ONE.
The Files box displays directories and (only) scene files present in the current directory.
Directory up — navigates up one directory level
Open directory — opens the directory and navigates down one level
New directory — creates a new directory in the current directory
Lock/Unlock — locks or unlocks the selected file so it can not be deleted or overwritten
Rename — renames a file or directory (if not locked)
Delete — deletes a file (if not locked) or a directory (if empty). Note that a directory may appear
empty but can still hold files (only Scene files are shown).
Always remove a USB Flash Drive by using the “Safe removal of USB Flash Drive" procedure.
After selecting the storage and file the file name appears at the right side of the window along
with the camera type, creation date and comment (if present):
To Next Page
Loading...