13 / 44
16570.16572_Alpha150Q/170Q/220Q_V1
• Protect your copter from dust, dirty, humidity and other small
parts. Do not expose it to vibrations or to extreme heath or
cold. The models may only be operated remotely in normal
outside temperatures such as from -10°C to +55°C.
• Always use all your Graupner HoTT components only with the
latest firmware version.
• If you have questions which cannot be answered by the oper-
ating manual, please contact us (contact information see page
5) or another expert in the field.
WARNING
• During programming, make sure that connected electric motors
do not start unintentionally. Injury risk by the turning propel-
lers! For safety reasons always remove the propellers when
programming. Always activate the Motor Stop function accord-
ing to the instructions of your transmitter.
• Avoid impacts and crushing. Check the copter regularly for
damages to the housings and cables, specially after model
crashes. Damaged or wet electronic components, even if
re-dried, should no longer be used!
• Never touch the turning propellers, this can cause serious
injury.
• The propellers must be mounted securely, thrown parts can
cause serious injury.
• Never stay in the danger area of running propellers! Long hair,
loose clothing such as scarves, loose shirts or similar, can be
sucked in by the propeller, flying parts can lead to serious inju-
ries.
• Observe the safety notes of the required components.
Safety notes for battery
CAUTION
• LiPo batteries are not a toy. Persons, including children, with
reduced physical, sensory or mental capabilities, or lack of
experience or knowledge, or not capable to use safely the bat-
tery must not use the battery without supervision or instruc-
tion by a responsible person.
To Next Page
Loading...
Need help?
General
