GRAUPNER MX-16S - Dual Rate; Expo - Fixed-Wing Continued; Combined Dual Rate and Expo Display; Exponential Function Setup; Expo Value Examples

57
Combined Dual Rate and Expo
If you have entered values for Dual Rates and Expo, the
two functions are superimposed as follows:
e.g. “switch back”:
and after moving switch “2” “front”:
Exponential function
If you wish to switch between two settings, select the
fi eld and assign a physical switch as described on
page 25. The assigned switch appears in the screen dis-
play together with a switch symbol which indicates the
direction of operation when you move the switch.
For example, the system enables you to fl y with a line-
ar curve characteristic in the one switch position, and to
pre-set a value other than 0% in the other switch posi-
tion.
To change the Expo value, fi rst select the SEL fi eld,
then use the right-hand rocker button in the highlighted
fi eld to set separate values for each of the two switch
positions:
Pressing CLEAR in the highlighted fi eld resets an alte-
red value to 0%.
In these examples the Dual Rate value is 100% in each
case.
Dual Rate / Expo – Fixed-wing model
S t i c k D e f l e c t i o n
®
+ 1 0 0 %
- 1 0 0 %
0
E x p o = + 1 0 0 % , D / R = 1 2 5 %
E x p o = + 1 0 0 % , D / R = 5 0 % E x p o = - 1 0 0 % , D / R = 5 0 %
S e r v o T r a v e l
®
S t i c k D e f l e c t i o n
®
+ 1 0 0 %
- 1 0 0 % 0
S e r v o T r a v e l
®
S t i c k D e f l e c t i o n
®
+ 1 0 0 %
- 1 0 0 % 0
S e r v o T r a v e l
®
0
1 0 0
1 2 5
%
- 1 0 0
- 1 2 5
0
1 0 0
1 2 5
%
- 1 0 0
- 1 2 5
0
1 0 0
1 2 5
%
- 1 0 0
- 1 2 5
Examples of different Expo values:
S t i c k D e f l e c t i o n
®
+ 1 0 0 %
- 1 0 0 %
0
E x p o = + 1 0 0 % E x p o = + 5 0 % E x p o = - 1 0 0 %
S e r v o T r a v e l
®
S t i c k D e f l e c t i o n
®
0
+ 1 0 0 %
- 1 0 0 %
0
0
S e r v o T r a v e l
®
S t i c k D e f l e c t i o n
®
- 1 0 0 %
0
S e r v o T r a v e l
®
0
1 0 0
1 2 5
%
- 1 0 0
- 1 2 5
0
1 0 0
1 2 5
%
- 1 0 0
- 1 2 5
0
1 0 0
1 2 5
%
- 1 0 0
- 1 2 5
+ 1 0 0 %