24 / 28
S1005_S1006_jp_V1
Digital trim
Digital trim with an optical and acoustic display
The two control sticks come with digital trimming. Briefly touch
the trimming switch to move the neutral position of the control
stick by a specific value with each click. If it is held, the trimming
moves in the corresponding direction with increasing speed.
The adjustment is made audible by tones of varying levels. It is
therefore easy to find the middle position during flight without
looking at the display. If you go past the middle position, a brief
pause is inserted.
The current trimming values are automatically saved when the
model memory is changed.
For factory setting the transmitter original trim is saved in relation
to the model memory but you can change this setting by assign-
ing to each flight phase a different trim setting.
The current trimming positions are displayed numerically and
graphically in the transmitter's basic display as well as in a spe-
cial display.
Display
Operation
The display is basically operated by touching the desired field
with a finger or the provided stylus.
Indications active/inactive fields
The icon on the left informs you if the function is active or inac-
tive.
Colored = active
To Next Page
Loading...
Need help?
General
