9 / 28
S1005_S1006_jp_V1
Protect all equipment from dust, dirt, moisture. All equip-
ment must be protected from vibration as well as excessive
heat or cold. The models may only be operated remotely in
normal outside temperatures such as from -10°C to +55°C.
Always perform a range test and functional test on the ground
before you use your model! Only so you ensure safe opera-
tion! To know how to perform a range check, please read
Part 2 of the manual.
Use all HoTT components only with the current software ver-
sion.
Save by each use of your model the log file. With a log file it
is possible to trace possible occurring technical failures. Only
so any claims can be considered.
For your safety by handling the transmitter
WARNING
Also while programming the transmitter, make sure that a con-
nected motor cannot accidentally start. Disconnect the fuel sup-
ply or drive battery beforehand.
CAUTION
Risk of fire! Avoid every kind of short-circuit in all sockets of the
transmitter! Use only the suitable connectors. In no case the
electronic component of the transmitter may be changed or
modified. Due to licensing reasons, any reconstruction and/or
modification of the product is prohibited.
Note
During transport protect the model and the transmitter from
damages.
To Next Page
Loading...
Need help?
General
