First contact
IS400 machine . 9
Description
The IS400 machine is an electronic engraving machine.
It has a keyboard, and a control panel with a L.C.D. screen connecting the software which is in the machine.
Files to be engraved are transferred from the computer to the machine by the intermediary of a cable which is plugged into
one of the two ports on the IS400 machine.
The actual engraving process is controlled by the spindle.
The object to be engraved is held in the vice (as standard) or by any other system recommended by GRAVOGRAPH (consult
your GRAVOGRAPH dealer for more information on systems available).
The IS400 machine has a maximum engraving surface area of 305x210 mm.
Front view of the machine
(pict 4)
B. Control panel
B1. L.C.D. screen
B2. 12-key control keyboard
H. Memory-card connector
J. Ensemble tool holder
K. Vice with pair of jaws
To Next Page
