Gree GMV-N22G/A3A-K

GREE GMV5 INDOOR UNIT SERVICE MANUAL
54
No.
Button name
Function
8
Set up&down swing status
9
X-FAN
Set X-FAN function
10
TIMER ON
Set timer on function
11
TIMER OFF
Set timer off function
12
SAVE
Set energy-saving function
13
SLEEP
Set sleep function
14
LIGHT
Set light function
15
CLOCK
Set clock of the system
16
I FEEL
Set I FEEL function
17
TEMP
Switch temperature displaying type on the unit’s display
4 Panel Display
4.1 Control Panel
Notes:
“AIR” function is an optional function of indoor unit, for the unit without such function, this function
is invalid; “E-HEATER”, “ROOM”, “OFFICE”, “RESTAURANT”, “COMMON” are obligate functions of
indoor unit that cannot be set.
4.2 Operational Instruction
4.2.1 Start up and close down the unit
Press “ON/OFF” button to start up the unit. Press “ON/OFF” button to close down the unit.
4.2.2 Mode Setting
Under power-on status, each time press “Mode” button, the mode will be switched according to the
following order circularly:
Notes:
◆
Only the master indoor unit can set auto mode;
◆
Under auto mode, if the indoor unit is in auto cooling, the “ ”and” ” icons are on; if the indoor
unit is in auto heating, the “ ”and” ” icons are on.
4.2.3 Setting of Light ON/OFF Function
(1) Light ON/OFF Function: can set the ON and OFF of light for display panel.