EasyManua.ls Logo

Gree GMV-N22G/A3A-K

Gree GMV-N22G/A3A-K
276 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GREE GMV5 INDOOR UNIT SERVICE MANUAL
65
Parameter
Code
Parameter
Name
Parameter Range
Default
Value
Remark
P37
Cooling setting
temperature in
automatic
mode
17°C -30°C
25
Cooling setting temperature heating
setting temperature ≥ 1.
Note: The two settings are still valid in
remote shielding status.
P38
Heating setting
temperature in
automatic
mode
16°C -29°C
20
P43
Preferential
operation
settings
00: common operation
01: preferential
operation
00
When power supply is insufficient, users
are allowed to power on/off the IDU set with
preferential operation and other IDUs are
forcibly powered off. A fault code is
displayed on the IDU that is forcibly
powered off.
P46
Accumulated
time clearing
for air filter
cleaning
00: not cleared
01: cleared
00
P49
Opening angle
of indoor unit
air-return
plate*
01: angle 1(25°)
02: angle 2(30°)
03: angle 3(35°)
01
Only applicable to units with air-return
plate
P50
Air outlet
temperature
setting for
Fresh Air
Indoor Unit in
cooling*
16°C~30°C
18°C
Only applicable to Fresh Air Indoor Unit
P51
Air outlet
temperature
setting for
Fresh Air
Indoor Unit in
heating*
16°C~30°C
22°C
Only applicable to Fresh Air Indoor Unit
P54
Union setting
of Fresh Air
Indoor Unit*
00: without union
control
01: with union control
00
After union function is set, Fresh Air
Indoor Unit will be turned on/off following
the on/off status of common indoor unit.
Besides, Fresh Air Indoor Unit can also
be turned on/off manually.
NOTICE! only applicable to Fresh Air
Indoor Unit
P69
Signal type of
access control
01:5-12V DC (including
12V) signal of access
control
02: 12V-24V DC
(excluding 12V) signal
of access control
03: 110V AC signal of
access control
04: 220V AC signal of
access control
04
Only applicable to wired controller XK79
with access control
Note:
In parameter setting status, FAN, TIMER, SLEEP, and SWING are invalid. By pressing the
ON/OFF button, users can return to the main interface but not power on/off the unit.
In parameter setting status, signals of the remote controller are invalid.

Table of Contents

Other manuals for Gree GMV-N22G/A3A-K

Related product manuals