Gree GMV5

GREE Photovoltaic Direct-driven Inverter Multi VRF Units
112
Parameter Code
Parameter Name
Unit
Remark
10 Discharge temperature of compressor 4 °C
This parameter is invalid for the
GMV5 series.
11 Discharge temperature of compressor 5 °C
This parameter is invalid for the
GMV5 series.
12 Discharge temperature of compressor 6 °C
This parameter is invalid for the
GMV5 series.
13 Operation frequency of compressor 3 Hz
This parameter is invalid for the
GMV5 series.
14
Current value of compressor 1
A
15
Current value of compressor 2
A
16 Current value of compressor 3 A
This parameter is invalid for the
GMV5 series.
17 Current value of compressor 4 A
This parameter is invalid for the
GMV series.
18 Current value of compressor 5 A
This parameter is invalid for the
GMV5 series.
19 Current value of compressor 6 A
This parameter is invalid for the
GMV5 series.
20
Reserved
21
Module temperature of compressor 1
°C
22
Module temperature of compressor 2
°C
23
Module temperature of outdoor fan 1
°C
24
Module temperature of outdoor fan 2
°C
25
Outdoor unit heating EXV1
PLS
26
Outdoor unit heating EXV2
PLS
27
Subcooler EXV
PLS
28
Defrosting temperature
°C
29
Liquid-extracting temperature of subcooler
°C
30
Outlet temperature of accumulator
°C
31 Oil return temperature °C
This parameter is invalid for the
GMV5 series.
32 Inlet-tube temperature of condenser °C
This parameter is invalid for the
GMV5 series.
33 Outlet temperature of condenser °C
This parameter is invalid for the
GMV5 series.
Notes:
① If a parameter value is negative, LED3 circularly displays the negative code "nE” and the numeric
value every one second. For example, for -30
°
C, LED3 alternately displays “nE” for one second
and then “30” for another second.
② The discharge temperature and environment temperature are displayed as four-digit values,
circularly displaying the higher two digits and the lower two digits. For example, if "01" and "15"
are alternately displayed, it indicates 115
°
C. If "nE", "00", and "28" are alternately displayed, it
indicates -28
°
C.
③ If a parameter is invalid for the unit, “00” is displayed.
④ If no button operations are performed on the master unit for five minutes, the function setting
automatically quits and the unit restores the current status.
Step 9: If the nb ODU bar code query is selected, the display is as follows. Enter the to-be-confirmed
status of ODU bar code query.