A/A DC INVERTER U-MATCH AIR CONDITIONERS MAINTENANCE
212
Instruction
Remove
evaporator
components
●Remove the
screws as shown
by the arrow in the
graph with
screwdriver. (There
are 6 screws on left
and right of the
evaporator and 5
on evaporator
outlet press plate
modules)
Remove fixing plate sub-assy for air sweeping fans
Remark: Make sure that the power supply is cut off before disassembling and protect all the parts during
disassembly.
Remark: Make sure that the power supply is cut off before disassembling and protect all the parts during
disassembly.
Step Illustration Handling
Instruction
Remove fixing
plate sub-assy for
air sweeping fans
●Remove the
screws shown in
the graph with
screwdriver.
Remove fan and motor components
Remark: Make sure that the power supply is cut off before disassembling and protect all the parts during
disassembly, especially the fastening screws for fans.
Step Illustration Handling Instruction
1. Remove front
and back scroll
cases
●Press the buckle at
the joints of front and
back scroll cases with
hands and pull
upward to remove the
front scroll case. Then
remove the screws on
the back scroll case.
Lift the buckle of back
scroll case with hands
and remove it.(As is
shown in the graph,
circle represents 2
screws on left and
right.)
To Next Page
Loading...
