A/A DC INVERTER U-MATCH AIR CONDITIONERS MAINTENANCE
213
2. Remove fans
●Remove the fixing
screws of fan wheel
with inner hexagonal
and remove the
wheel. The inner
hexagonal and its
direction of effect are
shown by the arrow
in the graph.
3. Remove
bearing fixing
plates
●Remove 4 screws
on the bearing fixing
plates with
screwdriver. (As
shown in the box in
the graph)
GTH30K3CI/ GTH36K3CI/GTH42K3CI
Disassembly of panel grating module
Remark: Make sure that the power supply is cut off before disassembling and protect all the parts during
disassembly. Do not put filter screen near the high temperature heat source.
Step Illustration Handling Instruction
Disassembly of
sub-assy of front
grill
●Unscrew the 2 clasps
of the upper grill and
the 2 screws of the
clasps.
●Open the grill,
disassemble the 2
down clasps to
remove the grill.
Disassembly of right and left finishing plates
Remark: Make sure the power supply is cut off before disassembling and protect all the parts during
disassembly. Do not scratch the outer parts.
Step Illustration Handling Instruction
Disassembly of
right and left
finishing plates
●Disassemble the
screws as shown in
the graph with
screwdriver and then
push upward to
remove the right and
left finishing
plates.(As is shown
in the graph, arrow
represents the
position of screws.)
To Next Page
Loading...
