Gree XE71-42/G

Wired Controller XE71-42/G
14
Function
Instruction
I-Demand
function
Unit will operate under save mode to save energy.
Holiday function
In the heating mode, when the user goes out, it is used to
maintain the indoor ambient temperature to ensure turbo
heating when the user comes back.
Memory function
When the power is restored after power failure, the indoor
unit resumes the original status.
Save function
Set the lower limit of set temperature for cooling and dry
mode and set the upper limit of set temperature for heating
mode to let the air conditioner operate in a smaller
temperature range for saving energy.
Auxiliary Heating
function
In the heating mode, auxiliary heat function is started up to
improve the heating efficiency.
Dry function
It used to blow off the moisture of the indoor unit’s
evaporator after shutdown to avoid mold. The drying
function can only be turned on under the cooling or dry
mode.
Filter clean
reminder
function
The air conditioning unit will record its own running time.
When the user set time is reached, it will remind the user to
clean the filter, so as to avoid problems such as poor
cooling and heating effect, abnormal protection and
bacterial growth.
Quiet function
Decrease the noise of the indoor unit and achieve the mute
effect.
Fixed-angle
swing mode
Switch between simple swing and fixed-angle swing to
satisfy user’s requirement.