Gree XE71-42/G - Page 20

Wired Controller XE71-42/G
15
Function
Instruction
Low-temperature
drying function
The unit runs the dry mode at a lower set temperature to
improve the drying capacity.
Setback function
After shutdown, the unit will automatically run to ensure that
the indoor ambient temperature is within the set
temperature range.
Independent
swing function
It can set the swing mode with 4 swing air outlets to satisfy
the users in different air outlet directions.
Panel lifting
function
The panel can come down to let the user to clean the filter.
WiFi function
Turn on, turn off or reset WiFi. (The unit should support
WiFi Function and the G-Cloud accessories should be
purchase separately for installation)
Auto clean
function
Unit will operate the self-cleaning process of
evaporator.( This function is applicable for some models)
4.7.1 Fresh Air Function Setting
Under on status, after entering into user function page, press “
˄
” or “
˅
” button to
select fresh air function and press “˂” or “˃” button to turn on or turn off air function.
Press “MENU/OK” button to enter into the setting page of fresh air mode.
After entering into the setting page of fresh air, press “˄” or “˅” button to adjust
the mode. There are 10 setting modes. Once setting is finished, press “MENU/OK”
button to save the setting.