Owner’s Manual
36
When Turbo function is activated, Turbo function icon “ ”
will be bright.
NOTES:
① Under Dry mode, fan speed is low and can’t be adjusted.
② When the wired controller is connected with a Fresh Air Indoor
Unit, fan speed of indoor unit will be high fan speed only. Fan
speed of indoor unit can’t be adjusted via “FAN” button.
③ If indoor unit’s fan speed is set auto, indoor unit will change fan
speed automatically according to room temperature in order to
make the room temperature more stable and comfortable.
5.5 Timer Setting
The wired controller is equipped with two kinds of timer: general
timer and clock timer. General timer is factory defaulted setting.
Please refer to 4.2.3 Parameter Setting for the timer setting way.
5.5.1 General Timer
Unit On/Off after a desired hour can be set through general
timer.
Set Timer: when timer is not set, press “TIMER” button to enter
timer setting and “HOUR” icon is blinking. Press “+” or “-” button to
adjust timer time. Press “TIMER” button to save the setting and then
exit setting.
Cancel Timer: when timer is set, press “TIMER” button to cancel
it.
Timer setting range: 0.5~24h. Press “+” or “-” button to increase
or decrease timer time by 0.5h; hold “+” or “-” button to increase or
To Next Page
Loading...
