Owner’s Manual
37
decrease timer time by 0.5h every 0.3s.
5.5.2 Clock Setting
Clock display: when the timer setting way is clock timer, timer
zone displays system clock in unit On and Off status. The clock can
be set at this time.
Clock setting: long press “TIMER” button for 5s to enter clock
setting. Press“+” or “-” button to increase or decrease clock time by
1min; hold “+” or “-” button for 5s to increase or decrease clock time
by 10min; hold “+” or “-” button for 10s to increase or decrease clock
time by 60min. Press “ENTER” button or “TIMER” button to save the
setting and then exit setting.
NOTE
: It is not applicable to partial units.
5.5.3 Clock Timer
Unit On/Off at a certain time can be set through clock timer.
Set Timer:
(1) Press “TIMER” button to enter timer on setting and the “ON”
icon is blinking.
(2) Press “+” or “-” button to adjust unit On time. Press
“ENTER” button to finish setting.
(3) Before pressing “ENTER” button, pressing “TIMER” button
can save unit On time and then switch to unit Off time
setting with “OFF” icon blinking.
(4) Press “+” or “-” button to adjust unit Off time. Press
“ENTER” button to finish setting.
Cancel Timer:
Press “TIMER” button to enter timer setting; press “TIMER”
To Next Page
Loading...
