Owner’s Manual
46
range is 00, 10-39. Press “ENTER” to turn on this function.
Turn off Filter Clean Reminder Function: When unit is on and
this function has been turned on, press “FUNCTION” button and
select Clean. Then “ ” icon will blink. Set the cleaning level as 00
and press “ENTER” function to cancel this setting.
When Filter Clean Reminder time is up, “ ” icon will light up to
remind you to clean the filter. There are two ways to cancel filter
clean reminding:
(1) Press “ ” button twice within one second to cancel
reminding and it will retime according to the original
cleaning level.
(2) Press “FUNCTION” button to turn to Filter Clean
Reminder Function, then press “ENTER” to cancel
reminding, and it will retime according to the original
cleaning level. The clean reminding can be cancel only
when you didn’t reset the cleaning level under the setting
of Filter Clean Reminder Function.
NOTE:
Description on cleaning level: When setting the Filter Clean
Reminder Function, timer zone will display 2 digits, of which the
former indicates the pollution degree of operating place and the
latter indicates the operating time of indoor unit. There are 4 types of
situations:
To Next Page
Loading...
