Wired Controller XK46
26
down swing icon will blink during switching.
1
）
When simple swing mode is set in unit on status, press “SWING” button to start
or stop up & down swing.
2
）
When fixed-angle swing mode is set in unit on status, press “SWING” button to
adjust swing angle circularly as below:
(2) Left & right swing function*:
Start left & right swing: In unit on status, press “FUNCTION” button to switch to left
& right swing function with left & right swing icon blinking, and then press
“ENTER/CANCLE” button to start left & right swing. When left & right swing is activated,
left & right swing icon will be bright.
Cancel left & right swing: When left & right swing is activated, press “FUNCTION”
button to switch to left & right swing with left & right swing icon blinking, and then
press “ENTER/CANCLE” button to cancel left & right swing.
3.7 QUIET SETTING
Quiet Function: decrease the noise of indoor unit and achieve the quiet effect.
Quiet function has two modes: Quiet mode and Auto Quiet mode. It is available only in
Auto, Cooling, Dry, Fan, Heating, 3D heating, Space heating mode.
Turn on Quiet Function: press FUNCTION button to turn to Quiet function and then
Quiet icon “ ” or auto quiet icon “ ” is blinking. At this moment, press “ ” or “ ”
button to switch between quiet and auto quiet, and then press ENTER/CANCEL button
to
activate.
Turn off Quiet Function: press FUNCTION button to turn to Quiet function and then
press ENTER/CANCEL button to cancel Quiet function.
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
To Next Page
Loading...
