Wired Controller XK46
31
3.12 FILTER CLEAN REMINDER SETTING
Filter Clean Reminder Function: Unit will remember its own operating time. When
the setting time is up, this function will remind you to clean the filer. A dirty filter will
result in bad heating and cooling performance, abnormal protection, bacteria gathering,
etc.
Turn on Filter Clean Reminder Function: When unit is on, press FUNCTION button
and select Filter Clean Reminder. “ ” icon will blink. Press “ ” or “ ” button to
adjust the cleaning level, of which the range is 00, 10-39. Press ENTER/CANCEL to
turn on this function
Turn off Filter Clean Reminder Function: When unit is on and this function has
been turned on, press FUNCTION button and select Clean. Then “ ” icon will blink.
Set the cleaning level as 00 and press ENTER/CANCEL function to cancel this setting.
When Filter Clean Reminder time is up, “ ” icon will light up to remind you to
clean the filer. Press FUNCTION button to turn to Filter Clean Reminder Function, then
press SWING/ENTER to cancel reminding, and it will retime according to the original
cleaning level. The clean reminding can be cancel only when you didn’t reset the
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
To Next Page
Loading...
