Greenheck Microprocessor Controller - Main Menu

Microprocessor Controller for DOAS14
®
Main Menu Navigation
Unit Enable
Main Status Ctrl Variables Alarm Menu
Unit Status
Temp Control
Active Alarms
Input Output Status
Dehumidification
Reset Alarms
Note:
Additional status screens
are displayed depending
on unit configuration.
Screens may include, but
are not limited to:
Occupancy
Damper positions
Fan status
Airflow
Setpoints
Economizer
Energy recovery
Cooling
Circuit pressure
Heating
Dehumidification
Static pressure
Refrigeration Compressor Control
Alarm History
Pressure Control
Clear History
Damper Control
Export History
Energy Recovery
Fan Control Supply Fan Control
Exhaust Fan Control
Occupancy
Advanced
Note:
The Advanced
menu is read-
only. The service
password is
required to change
these settings.
Reference the
Advanced menu
section for more
information.
*Consult
factory for more
information.
Login
Manual Overrides
Adv. Setpoints*
Network Settings
Backup/Restore
IO Status/Offset*
IO Config
Unit Config
Unit Settings*
Service Info*
Alarm
Management
Shutdown
Alarms
General
Alarms