Greenlee 853 - Product Overview; Product Description; Product Purpose; Safety and Grounding

Greenlee Textron / Subsidiary of Textron Inc.
2
4455 Boeing Dr., Rockford, IL 61109-2988 815/397-7070
853 Quad Bender™
KEEP THIS MANUAL
Table of Contents
Description ..................................................................... 2
Safety ............................................................................. 2
Purpose.......................................................................... 2
Important Safety Information ......................................3-4
Grounding Instructions...................................................5
Identification................................................................6-7
Setup.............................................................................. 8
Operation ..................................................................9-11
Illustrated Bending Glossary........................................ 12
Bending Instructions ...............................................13-17
Bending Tables .......................................................18-21
Handle Removal and Replacement ............................. 22
Transporting the Bender ..............................................22
Maintenance ................................................................ 23
Troubleshooting ...........................................................24
Description
The Greenlee 853 Quad Bender™ is intended to bend
1" to 2" EMT, IMC, rigid steel, and rigid aluminum
conduit from 0 through 90 degrees.
The Greenlee 853 Quad Bender™ is protected by
U.S. patent No. 5,226,305.
Safety
Safety is essential in the use and maintenance of
Greenlee tools and equipment. This instruction manual
and any markings on the tool provide information for
avoiding hazards and unsafe practices related to the
use of this tool. Observe all of the safety information
provided.
Purpose
This manual is intended to familiarize personnel with the
safe operation and maintenance procedures for the
Greenlee 853 Quad Bender™, Serial Code ADW.
Keep this manual available to all personnel.
Replacement manuals are available upon request at no
charge.
Mobil is a registered trademark of Mobil Oil Corporation.
and are registered trademarks of
Greenlee Textron.
Other Publications
Service Manual:
SB 285: Publication 999 3877.4