Greenlee 854 User Manual

INSTRUCTION MANUAL
854
Quad Bender
Read and understand all of the instructions and
safety information in this manual before operating
or servicing this tool.
52033653 © 2007 Greenlee Textron Inc. 11/07
Serial Code AKM
Español ............... 23
Français .............. 45

Greenlee 854 Specifications

General

Brand	Greenlee
Model	854
Category	Sander
Language	English

Summary

Product Introduction and Safety Basics

General Safety Importance

Importance of safety in tool use and maintenance.

Critical Safety Information

Hazard Symbols and Severity

Explains hazard symbols (Danger, Warning, Caution) and their severity.

Key Operational Safety Guidelines

Covers electrical, environmental, and personal safety during operation.

Grounding and Electrical Safety

Grounding Requirements

Connect tool to a grounded GFCI-protected receptacle for electric shock prevention.

Machine Identification and Specifications

Operation Safety and Warnings

General Operation Hazards

Critical warnings for hazardous environments, pinch points, electric shock, and loose clothing.

Using Roller Support Units

Adjusting the Squeeze

Squeeze Adjustment Procedure

Standard Bending Instructions

Single Bends (Stubs and Kicks)

Step-by-step guide for performing single bends (stubs and kicks) on conduit.

Offset Bending Techniques

Offset Bend Procedures

Special Bending Information