EasyManua.ls Logo

Greenlee 854 - Operation Safety and Warnings; General Operation Hazards

Greenlee 854
66 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
854 Quad Bender
Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
8
Operation
Do not use this tool in a hazard-
ous environment. Hazards include
ammable liquids, gases, or other
materials. Using this tool in a hazard-
ous environment can result in a re
or explosion.
Failure to observe this warning will
result in severe injury or death.
Electric shock hazard:
Connect the power cord to a
120 volt, 20 amp receptacle on a
ground fault protected circuit only.
See Grounding Instructions.
Do not modify the power cord or
plug.
Inspect the power cord before
use. Repair or replace the cord if
damaged.
Disconnect the unit from power
before servicing.
Failure to observe these warnings
could result in severe injury or death.
Wear eye protection when operating
or servicing this tool.
Failure to wear eye protection could
result in serious eye injury from ying
debris.
Pinch points:
Keep hands away from bending
shoe, rollers and conduit when
bender is in use.
Failure to observe this warning could
result in severe injury or death.
Unplug the bender before changing accessories.
Accidental startup could result in serious injury.
Do not operate the bender while wearing loose
clothing. Loose clothing can get caught in moving
parts.
Failure to observe this warning could result in severe
injury or death.

Other manuals for Greenlee 854

Related product manuals