Grizzly ERM 1844 G User Manual

GB
23
as deection and/or grass col-
lection devices.
• Do not overload the equip-
ment. Work only within the
specied power range and do
not change the regulator set-
tings on the motor. Do not use
low-powered machines for
heavy work. Do not use your
equipment for purposes other
than those for which it is de-
signed.
• Do not use the equipment near
inammable liquids or gases.
Non-observance will result in a
risk of re or explosion.
• Do not lift or carry the equip-
ment when the motor is run-
ning.
• Turn o󰀨 the appliance, unplug
it from the mains and check
that all moving parts are at
rest:
- Whenever you leave the ma-
chine,
- Before cleaning the ejec-
tion hole or removing block-
ages,
- When the equipment is out of
use,
- Before checking, cleaning or
working on the equipment,
- If the power cable is dam-
aged or frayed,
- If the equipment has hit a
foreign object or if strange
vibrations occur during work.
In this case, check the equip-
ment for damage and have it
repaired if applicable.
• Do not place feet or hands
near or under rotating parts.
Do not stand in front of the
grass ejection hole during sick-
le mowing.
Maintenance and Storage:
When servicing the blades,
remember that they can
move even if the power
source is o󰀨.
• Ensure that all nuts, bolts and
screws are tightened rmly and
the equipment is in safe work-
ing condition.
• Check the mower for any dam-
ages.
• Repair damaged parts as ap-
propriate.
• Do not attempt to repair the
equipment yourself unless you
have been trained to do so.
Any work not specied in these
instructions is to be carried out
only by customer service cen-
tres that we have authorised.
• Keep the equipment in a dry
location and out of reach of
children.
• Handle the equipment with
care. Keep tools sharp and
clean, in order to facilitate bet-
ter and safer work. Follow the
maintenance instructions.
• Wear protective gloves when
changing the cutting device.
• Regularly check the grass col-
lection device for wear and
strains. For safety reasons, re-
place worn or damaged parts.
When adjusting the blades,
take particular care to avoid
ngers being trapped between
the rotating blades and xed
parts of the machine.
• Check that only replacement
tools authorised by the manu-
facturer are used.

Grizzly ERM 1844 G Specifications

General

Brand	Grizzly
Model	ERM 1844 G
Category	Lawn Mower
Language	English