Grizzly ERM 1844 G User Manual

GB
24
Electrical Safety:
• Ensure that the mains voltage
matches the specications on
the rating plate.
• Connect the equipment to a
socked with a residual current-
operated protective device
(RCD) with a release current of
more than 30 mA.
• Avoid bodily contact with
earthed parts (e.g. metal fenc-
es, metal posts).
• Use only authorised power
cables of type H05RN-F,
which are no more than 75 m
long and suitable for outdoor
use. The power cable wire
cross section must be at least
2.5 mm
2
. Always completely
unroll cable drums before use.
Check the cable for damage.
• To x on the power cable, use
the cable suspension intended
for the purpose.
• Keep the power cable away
from the cutting tool when
working. The cutting blades
may damage the power cable
and result in contact with live
parts. Always run the power
cable behind the operator.
• Do not use the power cable to
pull the plug from the socket.
Protect the power cable from
heat, oil and sharp edges.
• Switch o󰀨 the equipment and
disconnect the plug from the
socket if the power cable is
damaged. If the power cable is
damaged, it must be replaced
by the manufacturer, the cus-
tomer services of the same, or
a qualied person, in order to
avoid hazards.
• Do not connect a damaged
power cable to the mains. Do
not touch a damaged power
cable when it is connected to
the mains. A damaged power
cable may result in contact with
live parts.
General Description
Function Description
The electric lawnmower has a cutting tool,
which turns parallel to the cutting level.
It features a powerful electrical drive, a
sturdy plastic casing, a safety switch, a
collision guard as well as a grass catcher
with level gauge. Additionally, the equip-
ment is height adjustable to six levels and
has smooth-running wheels.
For the function of the operating parts,
please refer to the descriptions below.
The illustration how to handle the ap-
pliance can be found on page 2-4.
Summary
1 Curved handle
2 Start lever
3 Tensioning lever
4 Lower bar (2 pieces)
5 Collision guard
6 2 Cross-head screws
7 Grass catcher
8 Back wheels
9 Front wheels
10 Housing
11 Cutting height adjuster
12 2 carrying handles
13 Cable holder
14 Cable strain relief
15 Connection cable
16 Release button (not visible)
17 Power inlet

Grizzly ERM 1844 G Specifications

General

Brand	Grizzly
Model	ERM 1844 G
Category	Lawn Mower
Language	English