Model G0842 (Mfd. Since 04/18)
-5-
P. Stylus: Controls depth of cut by "tracing"
contour of template or master spindle.
Q. Stylus Tension Adjustment Knob:
Increases or decreases pressure applied by
stylus on template or master spindle.
R. Copy Attachment Cutting Tool: Performs
cutting action on workpiece when using copy
attachment.
S. Hinged Template Support: Mounts a
flat template with the desired profile when
secured in UP position.
T. Template Support/Master Spindle Centers:
Secure template support or master spindle.
Figure 5. Rear copy attachment controls.
P
T
R
S
Figure 4. Front copy attachment controls.
O
M
N
K
L
K. Cutting Tool Lock Handle: Secures copy
attachment cutting tool in position.
L. Copy Attachment Safety Shield: Tilts up
or down as needed to shield user from flying
chips while using copy attachment.
M. Cutting Tool Adjustment Handwheel:
Moves cutting tool toward or away from
workpiece.
N. Copy Attachment: Mounts to lathe bed and
"traces" premade template or master spindle
during turning operations to allow user to
make identical finished workpieces.
O. Copy Attachment Handwheel: Rotates
clockwise to move copy attachment left.
Rotates counterclockwise to move copy
attachment right.
Copy Attachment
Q
To Next Page
Loading...
Need help?
General
