Model G0855/G0856 (Mfd. Since 02/19)
-9-
The information contained herein is deemed accurate as of 12/7/2018 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.
PAGE 2 OF 3
Model G0856
Main Specifications:
Main Specifications
Jointer Size.................................................................................................................................................. 8 in.
Bevel Jointing............................................................................................................................. 0 – 45 deg. L/R
Maximum Width of Cut................................................................................................................................ 8 in.
Maximum Depth of Cut............................................................................................................................. 1/8 in.
Minimum Workpiece Length...................................................................................................................... 10 in.
Minimum Workpiece Thickness................................................................................................................ 1/2 in.
Maximum Rabbeting Depth...................................................................................................................... 1/2 in.
Number of Cuts Per Minute..................................................................................................................... 22,000
Fence Information
Fence Length............................................................................................................................................. 38 in.
Fence Width.......................................................................................................................................... 1-1/4 in.
Fence Height......................................................................................................................................... 4-5/8 in.
Fence Stops............................................................................................................................. 45, 90, 135 deg.
Cutterhead Information
Cutterhead Type........................................................................................................................................ Spiral
Cutterhead Diameter........................................................................................................................... 3-1/16 in.
Number of Cutter Spirals.................................................................................................................................. 4
Number of Indexable Cutters.......................................................................................................................... 36
Cutterhead Speed............................................................................................................................. 5500 RPM
Cutter Insert Information
Cutter Insert Type.................................................................................................................. Indexable Carbide
Cutter Insert Length................................................................................................................................. 15 mm
Cutter Insert Width................................................................................................................................... 15 mm
Cutter Insert Thickness........................................................................................................................... 2.5 mm
Table Information
Table Length.............................................................................................................................................. 72 in.
Table Width.................................................................................................................................................. 9 in.
Table Thickness.................................................................................................................................... 1-3/4 in.
Floor to Table Height................................................................................................................................. 32 in.
Table Adjustment Type................................................................................................................... Handwheels
Table Movement Type............................................................................................................. Dovetailed Ways
Construction
Body Assembly.................................................................................................................................... Cast Iron
Cabinet............................................................................................................................................ Sheet Metal
Fence Assembly..................................................................................................... Precision-Ground Cast Iron
Guard................................................................................................................................... Die-Cast Aluminum
Table....................................................................................................................... Precision-Ground Cast Iron
Paint Type/Finish....................................................................................................................... Powder Coated
Other Information
Number of Dust Ports....................................................................................................................................... 1
Dust Port Size.............................................................................................................................................. 4 in.
Mobile Base............................................................................................................................................. Built-In
Other Specifications:
Country of Origin .............................................................................................................................................. Taiwan
Warranty ........................................................................................................................................................... 1 Year
Approximate Assembly & Setup Time .............................................................................................................. 1 Hour
Serial Number Location ................................................................................................................... Machine ID Label
ISO 9001 Factory .................................................................................................................................................. Yes
Certified by a Nationally Recognized Testing Laboratory (NRTL) ......................................................................... Yes
To Next Page
Loading...
Need help?
General
