Ground Zero DSP Series User Manual

- 18 -
FILE dropdown menu
*Important: The 10 presets can be used if the optional remote control GZDSP Remote or GZDSP Touch-Remote is
connected. Without the remote-control unit, it is only possible to use and edit the last preset that has been saved.
Preset memory saving and loading
*Note: All presets must be covered in numerical order (Pos 1>Pos 2>Pos 3>…) without skipping a position, otherwise
it will not be possible to access all presets with the remote control.
PC Contrl
Opens the „Select COM“ window (page 9)
Open
Opens a setup file that has been saved previously to the PC memory
or an external drive
Save
Saves the current setup as a file to the PC with unmodified filename. If
no filename has been selected yet, the dialogue will ask for the input.
Save as
Saves a setup file with a certain filename.
Factory setting
Sets the unit to default settings
Class-D AMP Setting
No function
Write to Device*
Saves the current setting to the preset memory of the GZDSP 4.60ISO
unit. At the following window, the preset number can be selected.
Read from Device*
Opens one of the available presets from the memory of the
GZDSP 4.60ISO. The preset can be selected from the following
window. The blue frame indicates the actually selected preset number.
Exit
Closes the DSP software
Open the dropdown menu at
Select Save Place
and choose one of the
preset positions. Confirm by clicking
Save
Open the dropdown menu at
Select Read Place
and choose one of the
preset positions. Confirm by clicking
Read

Ground Zero DSP Series Specifications

General

Brand	Ground Zero
Model	DSP Series
Category	Computer Hardware
Language	English