Name: Growatt SPF 3000TL LVM
Brand: Growatt
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Note: When the battery type set to Li, the setting option 12, 13, 21 will change to display percent.

Note: When the battery type set as “LI”, the Maximum charge current can't be modified by the user. When the

communication fail, the inverter will cut off output.

Note: Any questions about communicating with BMS, please consult with Growatt.

3. Communicating with battery BMS in parallel system

If need to use communicate with BMS in a parallel system, you should make sure to connect the BMS communication

cable between the battery and one inverter of the parallel system. It’s recommended to connect to the master

inverter of the parallel system.

Setting SOC point back to utility

source when selecting “SBU

priority” or “Solar first” in program

Default 50%, 6%~95% Settable

Setting SOC point back to battery

mode when selecting “SBU

priority” or “Solar first” in program

Default 95%, 10%~100% Settable

Low DC Cut-off SOC.

If self-defined is selected in

program 5, this program can be

set up

Default 20%, 5%~50% Settable

Questions and Answers:

Need help?

Do you have a question about the Growatt SPF 3000TL LVM and is the answer not in the manual?

Growatt SPF 3000TL LVM Specifications

General