Growatt SPF 6000T DVM-MPV User Manual

15
Operation
Power ON/OFF
Once the unit has been properly installed and the batteries are connected well, simply press On/Off switch
(located on the button of the case) to turn on the unit.
Operation and Display Panel
The operation and display panel, shown in below chart, is on the front panel of the inverter. It includes
three indicators, four function keys and a LCD display, indicating the operating status and input/output
power information.
1. LCD display
2. Status indicator
3. Charging indicator
4. Fault indicator
5. Function buttons
LED Indicator
LED Indicator
Messages
Green
Solid On
Output is powered by utility in Line mode.
Flashing
Output is powered by battery or PV in battery mode.
Green
Solid On
Battery is fully charged.
Flashing
Battery is charging.
Red
Solid On
Fault occurs in the inverter.
Flashing
Warning condition occurs in the inverter.
Function Buttons
Button
Description
ESC
To exit setting mode
UP
To go to previous selection
DOWN
To go to next selection
ENTER
To confirm the selection in setting mode or enter setting mode

Growatt SPF 6000T DVM-MPV Specifications

General

Model	SPF 6000T DVM-MPV
Category	Inverter
Rated Power	6000W
Output Voltage	230V AC
Efficiency	93%
MPPT Voltage Range	120-450V
Max. Charging Current	120A
Output Frequency	50/60 Hz
Battery Voltage	48V
Max PV Charging Current	120A
Operating Temperature	-10°C to 50°C
Communication	USB
Max Solar Input Voltage	500V
Protection	Overload, Short circuit, Over-temperature
DC Voltage	48V
AC Voltage	230VAC
Cooling Method	Fan