Growatt SPF 6000T DVM-MPV User Manual

19
03
AC input voltage range
Appliance (default)
If selected, acceptable AC input
voltage range will be within
154~272VAC
If selected, acceptable AC input
voltage range will be within
184~272VAC
05
Battery type
AGM (Default)
Flood
User-Defined
If “User-Defined” is selected, battery charge voltage and low DC
cut-off voltage can be set up in program 19, 20 and 21.
User-Defined 2
(Suitable for lithium battery when no communicating with BMS)
If „US2‟ is selected, battery charge voltage and low DC cut-off
voltage can be set up in program 19,20 and 21.
Lithium (Only suitable when communicate with BMS)
The lithium battery BMS communication protocol options
06
Auto restart when
overload occurs
Restart disable (default)
Restart enable
08
Output voltage
230V
220V
240V(default)
208V
09
Output frequency
50Hz (default)
60Hz

Growatt SPF 6000T DVM-MPV Specifications

General

Model	SPF 6000T DVM-MPV
Category	Inverter
Rated Power	6000W
Output Voltage	230V AC
Efficiency	93%
MPPT Voltage Range	120-450V
Max. Charging Current	120A
Output Frequency	50/60 Hz
Battery Voltage	48V
Max PV Charging Current	120A
Operating Temperature	-10°C to 50°C
Communication	USB
Max Solar Input Voltage	500V
Protection	Overload, Short circuit, Over-temperature
DC Voltage	48V
AC Voltage	230VAC
Cooling Method	Fan