Grundfos CIM 150 PROFIBUS DP - Device Identification (Deviceidentification, Module 47)

English (GB)
24
7.13 Device identification (DeviceIdentification, module 47)
The data type is 10, non-standard.
Byte Name/description
1
UnitFamily [enumeration] UnitType [enumeration]
1: UPE/MAGNA/MAGNA3 circulator pump
5: UPE, 3-phase
7: MAGNA, 1-phase
9: MAGNA, 1-phase, small
10: MAGNA3
2: E-pump, 1-phase/3-phase, based on MGE motor or CUE
frequency converter
2: MGE, 1-phase
3: MGE, 3-phase
4: MGE, 3-phase, large
5: CUE frequency converter
6: MGE, 3-phase, model G
7: MGE, 3-phase, model H and later
7: MP 204 motor protector 1: MP 204
17: Hydro Multi-E model G
1: With 3-phase pumps
2: With 1-phase pumps
21: Hydro MPC/Control MPC, Hydro Multi-B
1: Hydro MPC/Control MPC, CU 351/CU 352
2: Hydro Multi-B, CU 323
25: CR Monitor 1: CR Monitor, CU 351
26: Dedicated Controls 1: Dedicated Controls, CU 362
30: Smart Digital Dosing, DDA 1: Smart Digital Dosing, DDA
39: Hydro Multi-E model H and later
1: With 3-phase pumps
2: With 1-phase pumps
2
UnitType [enumeration]
According to description above.
3
UnitVersion [enumeration]
Used by Grundfos.
4 CIMSoftwareVersion [number]
5 CIMSoftwareRevision [number]
6 CIMModel [enumeration]
Pumpland.ru