English (GB)
5
3.2 PROFINET IO, CIM 500
Fig. 4 Example of a CIM 500 solution. The module is
installed inside the CU352 controller
Fig. 5 Example of a CIU 500 solution for Hydro Multi-E,
model G
Fig. 6 Example of a CIM 500 solution for Hydro Multi-E
model H and later. Pumps connected via built-in radio
communication (Grundfos Glowpan)
The example for Multi-E model H and later is identical for TPED
model H and later and MAGNA3-D. In all cases, mount the CIM
module in the master pump placed to the left.
For the purpose of redundancy, you can mount a second CIM
module in pump 2 for TPED and Multi-E (not MAGNA3-D). In that
case, all writings from the Profibus master must be sent to both
CIM modules.
TM04 2297 2208TM04 2608 2608TM07 0146 4317
PROFINET IO
Hydro MPC
(CU 352)
CIM 500
Sub-GENIbus
RS-485
CIU 500
External
GENIbus
RS-485
PROFINET IO
CRE with
Hydro Multi-E
add-on
Sub-GENIbus RS-485
To Next Page
Loading...
