17
MAGNA3 INSULATED PUMPS INSTALLATION MANUAL
Multi-Pump Setup
IMPORTANT: The correct day/time for the primary pump must
first be completed before going to this screen. The settings
automatically propagate to the second (backup) pump.
3. Go back to the Assist menu (after both pumps are set up as Alternating, Backup or Cascade), and follow the steps above
(through Step 2 of 9). Then, continue with the screens below.
IMPORTANT: The assist menu will not go past this step if the
second pump has not been set up for multi-pump operation.
To Next Page
Loading...
