Grundfos Hydro Multi-E Series User Manual

English (GB)
32
14.4 Menu overview for Grundfos GO Remote
14.4.1 Main menus
Menu or function
available for system
Menu or function
available for pump
Dashboard ●●
Status ●●
Settings ●●
"Setpoint" ●
"Operating mode" ●
"Control mode" ●
"Pipe filling function" ●
"Buttons on product" ●
"LiqTec" ●
"Stop function" ●
"Controller" ●
"Operating range" ●
"Ramps" ●
"Pump number" ●
"Radio communication" ●
"Analog input 1" ●
"Analog input 2" ●
"Digital input 1" ●
"Digital input 2" ●
"Signal relay 1" ●
"Signal relay 2" ●
"Limit 1 exceeded" ●
"Limit 2 exceeded" ●
"Standstill heating" ●
"Motor bearing monitoring" ●
"Service" ●
"Date and time" ●
"Store settings" ●
"Recall settings" ●
"Undo" ●
"Pump name" ●
"Unit configuration" ●
Alarms and warnings ●
Assist ●
Product information ●

Grundfos Hydro Multi-E Series Specifications

General

Control Type	Variable Speed
Motor Efficiency	IE3
Controller	CU 352
Enclosure Class	IP54
Series	Hydro Multi-E
Frequency	50/60 Hz
Protection Class	IP54
Weight	Varies by model
Communication	Modbus
Application	Water Supply, Pressure Boosting
Liquid Temperature	0°C to +60°C
Material	Stainless Steel